• Kopieer en plak alsjeblieft de foutboodschap die je op je scherm ziet, indien van toepassing.

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Leg uit wat je wilde doen, wat je deed en wat er gebeurde

• Welke browser gebruik je?

• Kopieer en plak alsjeblieft de tekst die in het Engels wordt getoond in plaats van in jouw taal. Als je een schermkopie van deze bug hebt (goede gewoonte), kun je een hosting-service voor afbeeldingen naar keuze gebruiken (bijvoorbeeld snipboard.io) om deze te uploaden en de link hier te kopiëren/plakken. Is deze tekst beschikbaar in het vertaalsysteem? Zo ja, is deze meer dan 24 uur geleden vertaald?

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Welke browser gebruik je?

• Gelieve jouw suggestie precies en beknopt uit te leggen zodat het zo makkelijk mogelijk is om te begrijpen wat je bedoelt.

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Welke browser gebruik je?

• Wat stond op het scherm toen je geblokkeerd was (Leeg scherm? Een deel van de spelinterface? Foutboodschap?)

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Welke browser gebruik je?

• Met welk onderdeel van de regels is geen rekening gehouden bij de BGA-versie?

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Is de inbreuk op de spelregels zichtbaar in de spelherhaling? Indien ja, bij welk zetnummer?

• Welke browser gebruik je?

• Welke spelactie wilde je uitvoeren?

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Wat probeerde je te doen om deze spelactie te laten optreden?

• Wat gebeurde er toen je dit probeerde te doen (foutboodschap, melding op de statusbalk van het spel, ...)?

• Welke browser gebruik je?

• In welke fase van het spel deed het probleem zich voor (wat was de huidige spelinstructie)?

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Wat gebeurde toen je deze spelactie probeerde (foutboodschap, melding op de statusbalk van het spel, ...)?

• Welke browser gebruik je?

• Beschrijf alsjeblieft het probleem met de beeldweergave. Als je een schermkopie van deze bug hebt (goede gewoonte), kun je een hosting-service voor afbeeldingen naar keuze gebruiken (bijvoorbeeld snipboard.io) om deze te uploaden en de link hier te kopiëren/plakken.

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Welke browser gebruik je?

• Kopieer en plak alsjeblieft de tekst die in het Engels wordt getoond in plaats van in jouw taal. Als je een schermkopie van deze bug hebt (goede gewoonte), kun je een hosting-service voor afbeeldingen naar keuze gebruiken (bijvoorbeeld snipboard.io) om deze te uploaden en de link hier te kopiëren/plakken. Is deze tekst beschikbaar in het vertaalsysteem? Zo ja, is deze meer dan 24 uur geleden vertaald?

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Welke browser gebruik je?

• Gelieve jouw suggestie precies en beknopt uit te leggen zodat het zo makkelijk mogelijk is om te begrijpen wat je bedoelt.

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Welke browser gebruik je?